 
     |
 First published June 14th 2007 - A couple of years ago
Burning Man A strange but efficient foam popper for all kinds of strange fish.
Nevertheless I was fooling around. We had talked about catching sea trout in the surface using a Danish pattern called The Cigar – a huge, cylindrical muddler – and I wanted to try and create something that was a little easier to tie, lighter to cast and still able to make a lot of commotion in the water. I have tied tonnes of muddlers over the years, and deer hair has a huge place in my heart. But foam also has a rightful place in there. Foam is practical, easy to use and cheap. And it makes a lot less of a mess than deer hair. Minuscule Plipper A couple of years ago I tied a small Plipper-like pattern for garfish. The Plipper is a pike fly tied on a tube, while the garfish one was tied with narrow strips of yellow foam on small, light saltwater hooks. I never had great success with the fly, and forgot about it until recently. When the talk fell on surface flies for sea trout I remembered my small, yellow flies. I grabbed some thin tube that the King of the Tubes, Bob Kenly, had once sent me, and cut off a bit. I had some orange closed cell polycelon foam laying around, and just acquired some really bright orange rubber legs and tying thread to match for another project. So the scene was set.
Tying on tubes has always fascinated me. Tube flies are practical and different, and the tube technique opens a world to something else. Tube tying also requires a special tool: a tube vice or a tube holder for your vice. I have a large number of these, but recently the two Danes Peter Falkenberg and Karsten Marcher sent some samples of their excellent tube tools. I will return to these later, but just say that they do a great job. Armed with a short needle in one of the holders I could fix the tube and start my project. After a few tests I was on to something. Foam and rubber legs combined into something that I liked the look of, and which I thought could do the job. I tied four flies and on my next trip I armed myself with some needle sharp carp hooks and these four flies. Popping action That day in early June we were fishing in daylight over a nice stony reef with lots of current. I had started my tests of the fly in still water, but once in the current it showed its virtues. Popping this little baby across the current drew a lot of fish-attention. Mostly garfish, I'm sure, but I'll bet you that a trout or two also traced the splashes and streaks made by the fly in the surface. My good friend Henning was equipped with one too, and both of us had a lot of fun. I hooked one sea trout that took violently in the surface and we both got many garfish and missed ten times that. The fly had passed its test.  See The Burning Man swim in this short video More fish Just a few days ago we had a couple of trips again, where the fly did what it could to draw up fish. I had a couple of really fierce strikes from large rainbows, and again the garfish were crazy about the fly.
Not any more! I'm casting a Burning Man first to these fish now. Seeing them come up to chase the fly in the surface is just too exiting to miss. And of course there are other species that can be attracted to this type of fly too. Mainly bass, but also panfish, different saltwater species, perch and many others. I have also promised myself to break the sacred rituals of salmon fishing with feathers and fur only and hitch this fly across a salmon pool as soon as I get the chance. And reversing the Plipper->Burning Man process, a Giant Burning Man would definitely be able to attract a pike.
Tying steps Notes on materials
Look for foam at Rainy's and tubes at The Canadian Tube Fly Company or The Fly Fishing Shop. The hooks I use are Kamasan specimen hooks called B983, which are usually available in tackle shops with a wide assortment of gear. Any single, straight eye hook with a sufficiently small eye can be used. When tying on the fly, pass the tippet through the front of the tube (the end with double foam lips) and tie on the hook with the tube loosly sliding on the tippet/leader. After having trimmed the tag, pull the hook eye a bit into the tube to secure it. Once the fish strikes, the hook will often dislodge from the fly and let the fly slide back up the leader. This keeps the tube from acting as a lever while you fight the fish. Keep the wet flies and the hooks store separately to avoid rusty hooks.
A Global Fly Fisher Publication Copyright © 1994 - 2008, Joergensen/Petti/Schweitzer/Skehan Portions of this site copyright © the contributors. All rights reserved. This material is for personal use only. Do not distribute without prior written consent from each copyright holder. Comments and suggestions are welcome |
Submitted July 24th 2008
Why would you need an eye for the hook if you have the space to make a knot for a straight hook?and like that it will fit easier in the tube,and you can use a lot more hooks;thank you for the fly,I think it's an excellent fly.